Main components of pump is specialized for the characteristics of inorganic zinc coating, to protect against malfunctions and abrasions.
Compared to the uneven coat created by a brush application, airless paint sprayer can save coating material by 20-30%.
Using a brush or roller application might seem cost-effective in the short-term, but in the long-run labor can cost at least twice as much.
- High Quality piston and seal rings For long lifetime spraying.
- High-performance and Stable Performance Pump.
- Stainless steel material and Easy to change pump&pump seal.
- Durable with rubber material and good sealing performance.
- Long-time usage life with 1 Year Warranty.
- Widely used in steel manufacturing, container manufacturing and construction
- Also suitable for furniture making, encaustic tile manufacturing and mechanical vehicle manufacturing.
|Technical Data (PT3K-6HD)|
|Tip Size||0.15mm-1.00mm (0.0059in.-0.039in.).|
|Max. Dispense Rate||6.0lpm|
|Max. Working Pressure||23Mpa (3626psi).|
|Hose Length||15m (49.2ft)|
|Spray Fan||500mm (19.7in.)|
|Spray Gun to Surface||500mm-700mm (19.7in-27.6in.)|
|Pump Type||Electric piston pump|
|Ideal Uses||Steel structures|
|Large architectural interior and exterior|
|Ships and boats|
|Spray||Interior and exterior latex|
|Heavy-duty anticorrosion paintings|
|Lacquer for tiles|
|Epoxy zinc-rich paints|
|Enamels, Putty, Varnishes, Stains|
|Advantages||Portable for flexible use anywhere.|
|Quicker and simpler maintenance and assembly.|
|This sprayer is durable and long lasting and with a long life motor.|
|With piston rod moving slowly, there will be no sediment and paints won’t harden.|
|Pressure is stable for a nice even coat.|
|Main components of pump is specialized for the characteristics of inorganic zinc coating
to protect against malfunctions and abrasions.
|Compared to the uneven coat created by a brush application, airless paint sprayer can
save coating material by 20-30%.
|Using a brush or roller application might seem cost-effective in the short-term, but in the
long-run labor can cost at least twice as much.